Posts

Showing posts with the label papercrete

Reworked Papercrete "Gazebo"

Image
] The papercrete "gazebo" structure that I made years ago was showing some deterioration, especially the areas where the papercrete was most exposed to weather. I used type S mortar to cover the weathered papercrete, and reworked most of the faces using my "sculpture" mortar mix. The papercrete "trees" on the back side of the structure had held up well, so I left them except to stain them with exterior wood stain, to bring them out a bit and help preserve them. 

Moons, faces, totem pole

Image
 Experiments using various 3:1 mixtures of cellulose insulation (paper), peat moss, and sand with Portland cement -- three parts aggregate to one part cement -- with sundry ingredients added (builder's lime, joint compound, asphalt emulsion). Trying for a more malleable, clay-like "concrete" formula.

Resurfacing the Papercrete Garden Wall 5 (repost)

Image
I accidentally deleted this post. I'd written that I'd run out of ready mix joint compound and substituted some powdered joint compound, and was pleased with how it handled. It also allowed me to thoroughly mix the joint compound in, which is difficult when using ready mix. When using ready mix joint compound, I add water to the sand, cement, and cellulose insulation, then add a glob of joint compound, squeezing and mixing as thoroughly as possible. Using the powder I can just add the joint compound to the dry mix and mix it in with a drill bit. I was surprised that the powder gave the mix a similar "clay-like" quality to that mixed with ready-mix. I'd made small batches that day, using a two pound coffee can, mixing one can sand, 1/2 can Portland Cement, 1/2 can cellulose insulation, and what amounted to two cups powdered joint compound, and mixed it with an electric drill with a mixer bit. This mix seems to set a bit, especially on a hot afternoon, in the b...

Resurfacing the Papercrete Garden Wall 6

Image
Continuing work on the garden wall using the sandy mix with powdered joint compound. This section is an effort at faux wood. I'm fairly pleased with it and would like to try "faux bois" textures with finer aggregates than sand and paper.  The photo below is the finished section of "faux brick showing behind broken stucco."